UNIVERSAL HINGES PUSH
Universal hinges - 110° opening - Standard applicationHinges equipped with a special spring for the opening of handle-less doors
- For doors made with special materials
- Integrated Push system
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
Special materials
The hinges are equipped with a new fixing system that allows them to be fitted to doors with a minimum thickness of 8 mm.
The extremely reduced thickness enables the use of the doors made of special materials, such as metal, ceramics, cements, quartz composites, HPL, HDF and MDF.
The Push-System is a self-opening system for the doors of all types of handleless furniture. It consists of a series of self-opening hinges, release devices that can be fitted to the top, base or side panel of the cabinet, and retaining catches to be fitted to the back of the door.
Push hinges are equipped with a special spring that acts to open the door independently of the release device.
- Hinges for doors with a minimum thickness of 8 mm made with special materials.
- Possible fixing inset distance on the door (K): from 0 to 22 mm.
- 110° opening.
- To limit the opening of the hinge, see “Accessories”
- Compatible with all traditional Series 200 mounting plates and with all Domi snap-on monting plates.
- The hinges must be fixed, if possible, with the screws included in the packaging.
CBYQAC9
DPMSNB
Release device. ø 10 mm, 40 mm length.Beige
DPASNB
Release device to be used to increase the magnetic holding strength. It must always be used together with the DPM. The suggested position of the DPM is the point of pressure on the door. The DPA can be positioned at any point along the opening edge of the door.ø 10 mm, 40 mm length.
Beige
DP28SN9
Retaining catch to be inserted with pin.ø 11.5 mm
DP38XX91
Retaining catch with adhesive.20x14 mm surface.
For use with aluminum doors or smooth surfaces.
DP39XXG
Adjustable magnetic catch. Inserted into the door.ø16.6 mm
Screw cover cap S2BX83H___
Symmetrical steel screw cover cap, it can be personalised on request.
For Series 100, 200, 700, F, M, 400 and universal hinges
S2BX83H9__ = Nickel
S2BX83H6__ = Titanium
Screw cover cap S2MX83H___
Symmetrical steel screw cover cap with embossed logo.
For Series 100, 200, 700, F, M, 400 and universal hinges
S2MX83H9__ = Nickel
S2MX83H6__ = Titanium
Angle restriction clip SBA237X6
For universal hinges, it limits opening angle to 90°.
Cover SBAX78A6SN
For universal hinges
Pozi screwdriver D2A7XCXCP
Pozi screwdriver
Technical pamphlet
Check out the functionality and aesthetics of all Salice products
UNIVERSAL HINGES PUSH
Universal hinges - 110° opening - Standard application
Hinges equipped with a special spring for the opening of handle-less doors
- Glass doors
- Integrated Push system
- No drilling is required
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES PUSH
Universal hinges - 110° opening - Standard application / half-inset doors / doors with moulded profiles
Hinges equipped with a special spring for the opening of handle-less doors
- Wood doors
- Integrated Push system
- For doors of small weight and thickness (12-20 mm)
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES
Universal hinges - 110° opening - Standard application
Hinge with integrated soft-close
- Glass doors
- No drilling of the glass is required
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES
Universal hinges - 110° opening - Standard application
Hinge with integrated soft-close
- For doors made with special materials
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES
Universal hinges - 110° opening - Standard application / half-inset doors / doors with moulded profiles
Hinge with integrated soft-close
- Wood doors
- For doors of small weight and thickness (12-20 mm)
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES
Universal hinges - 110° opening - Standard application
Self-close hinge
- Glass doors
- No drilling of the glass is required
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES
Universal hinges - 110° opening - Standard application
Self-close hinge
- For doors made with special materials
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
UNIVERSAL HINGES
Universal hinges - 110° opening - Standard application / half-inset doors / doors with moulded profiles
Self-close hinge
- Wood doors
- For doors of small weight and thickness (12-20 mm)
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
PUSH
Series 200 - 110° opening - Standard application
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For doors of medium weight and thickness (16-26 mm)
- Wooden doors
- 110° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
PUSH
Series 200 - 94° opening - Standard application
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For thicker doors (19-35 mm)
- Wooden doors
- 94° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional one
PUSH
Series 200 - 94° opening - Positive angled application
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For thicker doors (19-35 mm)
- Wooden doors
- 94° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional one
PUSH
Series 200 - 94° opening - Inset blind corner hinges
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For thicker doors (19-35 mm)
- Wooden doors
- 94° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
PUSH
Metal profiles (20 mm) - Standard application
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For 20 mm-thick doors
- Aluminium-frame doors
- 105° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
PUSH
Metal profiles (20 mm) - Positive angled application
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For 20 mm-thick doors
- Aluminium-frame doors
- 105° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
PUSH
Metal profiles (20 mm) - Inset blind corner hinges
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For 20 mm-thick doors
- Aluminium-frame doors
- 105° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones
PUSH
Series 200 - 155° opening - Standard application
Hinges equipped with a special spring for the opening of handle-less doors
- Integrated Push system
- For thicker doors (max. 28 mm)
- Wooden doors
- 155° opening
- Snap-on fixing with Domi mounting plates, screw fixing with traditional ones