PACTA With Push system for single doors-1

PACTA

With Push system for single doors

System for fall flaps

  • Wooden doors
  • Door height from 280 to 400 mm
  • Door weight from 1,5 to 9,5 kg
  • 90° opening
  • Decelerated opening action
Pacta confers a decelerated opening action and the fall of the door is gradual and controlled.

In the fully-open position, the door and base panel are aligned, creating a uniform and flat surface.
Pacta comes in a variety of finishes. Its applications are numerous: in living room and kitchen cabinets, to create desks in children’s furniture or for writing surfaces and table extensions in hotel furniture.
We suggest that you use the central hinge for cabinets over 900 mm width.

PACTA With Push system for single doors-2

Pacta is a compact hinge for fall flaps which operates without the need for additional stays or cables.

  • Hinge for flap doors with decelerated opening.
  • Push opening.
  • Fixing to the base of the cabinet with longitudinal snap-on mounting plate.
  • Standard drilling of the door ø 35.
  • 13 mm deep cup.
  • 90° opening.
  • Fixed K = 4.5 mm.
  • Side-, front and vertical door adjustment.
  • Central hinge for cabinets over 900 mm width to be used.
  • Covers available in numerous finishes.
FRBKFEP_SN9
Push opening
SRXB78A1XXXX_

Cover
WHITE

SRXB78AQXXXX_

Cover
GLOSSY WHITE

SRXB78AIXXXX_

Cover
STAINLESS STEEL

SRXB78AMXXXX_

Cover
GREY

SRXB78ACXXXX_

Cover
CHAMPAGNE

SRXB78A0XXXX_

Cover
SATIN METAL BLACK

SRXB78ANXXXX_

Cover
GLOSSY METAL BLACK

DPMSNB
Release device. ø 10 mm, 40 mm length.
Beige
DPMSNG
Release device. ø 10 mm, 40 mm length.
Grey
DPASNB
Release device to be used to increase the magnetic holding strength. It must always be used together with the DPM. The suggested position of the DPM is the point of pressure on the door. The DPA can be positioned at any point along the opening edge of the door.
ø 10 mm, 40 mm length.
Beige
DPASNG
Release device to be used to increase the magnetic holding strength. It must always be used together with the DPM. The suggested position of the DPM is the point of pressure on the door. The DPA can be positioned at any point along the opening edge of the door.
ø 10 mm, 40 mm length.
Grey
DP39XXG
Adjustable magnetic retaining.
ø16.6 mm
DP28SN9
Retaining catch to be inserted.
ø 11.5 mm
DP38XX91
Retaining catch with adhesive.
20x14 mm.
FRCK59RXXX1
Central hinge with cover cap
Suggested for cabinets over 900 mm width
WHITE
FRCK59RXXXQ
Central hinge with cover cap
Suggested for cabinets over 900 mm width
GLOSSY WHITE
FRCK59RXXXI
Central hinge with cover cap
Suggested for cabinets over 900 mm width
STAINLESS STEEL
FRCK59RXXXM
Central hinge with cover cap
Suggested for cabinets over 900 mm width
GREY
FRCK59RXXXC
Central hinge with cover cap
Suggested for cabinets over 900 mm width
CHAMPAGNE
FRCK59RXXX0
Central hinge with cover cap
Suggested for cabinets over 900 mm width
SATIN METAL BLACK
FRCK59RXXXN
Central hinge with cover cap
Suggested for cabinets over 900 mm width
GLOSSY METAL BLACK
Switch to the salice US website to see the products specific to the US
Yes, take me to the US website No, thanks