Smove: soft close mechanism fully integrated into the drawer runner.
The fluid-based soft close device guarantees a smooth action on any drawer. From pots and pans drawers to powder rooms, from garage cabinets to silverware drawers, F70 represents an ideal and versatile solution to all needs.
FACE FRAME ASSEMBLY WITH METAL SOCKET
Drawer length: 381 mm (15")
Runner length: 390 mm
Minimum inside cabinet depth (metal socket): 402 mm
Minimum inside cabinet depth: 399 mm
FACE FRAME ASSEMBLY WITH METAL SOCKET
Drawer length: 457 mm (18")
Runner length: 466 mm
Minimum inside cabinet depth (metal socket): 478 mm
Minimum inside cabinet depth: 475 mm
FACE FRAME ASSEMBLY WITH METAL SOCKET
Drawer length: 533 mm (21")
Runner length: 542 mm
Minimum inside cabinet depth (metal socket): 555 mm
Minimum inside cabinet depth: 552 mm
EURO SHORT VERSION
Drawer length: 457 mm (18")
Runner length: 465 mm
Minimum inside cabinet depth: 474 mm
EURO SHORT VERSION
Drawer length: 533 mm (21")
Runner length: 541 mm
Minimum inside cabinet depth: 551 mm
EURO SHORT VERSION
Drawer length: 610 mm (24")
Runner length: 618 mm
Minimum inside cabinet depth: 627 mm
Standard metal socket
- For F70 full extension runners
- Lateral self-alignment feature
- One piece stamped metal, zinc-coated
- Non-handed
- Use a minimum of 4 screws per socket
Narrow metal socket
- For F70 full extension runners
- Lateral self-alignment feature
- One piece stamped metal, zinc-coated
- Non-handed
- Use a minimum of 4 screws per socket
Drilling templates for drawers
Pre-drilling for the clips reduces the possibility of splitting the wood, thus assuring the correct and level installation of the clips. The correct and level mounting assures a smooth assembly and operation of the drawer slide.