KITCHEN
Pacta

SHELF - PULL-OUT SHELF

Full-extension runner fixed to the shelf by clip

Pacta

EXEDRA

Pocket door system with assisted sliding action enhanced by linear damping to gently control the movement of the door

Pacta

SILENTIA+

Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup.

Pacta

WASTE BIN SYSTEM

Kit composed by Shelf runners, premounted on a steel support, fully assembled Lineabox drawer, bin-holder frame and bins

Pacta

LINEABOX

Metal drawer with a rapid assembly system, with no machinery or templates needed

Pacta

SPLIT

System of compartments for the organisation of drawer interiors

Feel the design according to your favourite product
Learn about the other products

SHELF
SMOVE 65559 - Concealed runner
Full-extension runner fixed to the shelf by clip
  • Runner length from 350 to 600 mm
  • Dynamic load capacity 30 kg
  • Integrated Smove system
  • Full-extension
POCKET DOOR SYSTEM
Exedra
System with assisted sliding action enhanced by linear damping to gently control the movement of the door
  • Max. weight 30 kg (66 lbs)
  • Thickness from 19 mm (3/4") to 30 mm (1-3/16")
  • Width from 400 mm (15-3/4”) to 900 mm (35-7/16”)
  • Height from 1550 mm (61-1/32”) to 2500 mm (98-7/16”)
  • Soft closing movement while sliding in and out
SILENTIA+
Series 100 - 105° opening - Standard application
Hinges with adjustable integrated soft-close mechanism operated by twin silicone-oil dampers housed in the hinge cup.
  • For doors of small weight and thickness (15-20 mm)
  • Wooden doors
  • 105° opening
  • Snap-on fixing with Domi mounting plates, screw fixing with traditional mounting plates
WASTE BIN SYSTEMS
Storage unit width 450 mm
Kit composed by Shelf runners, premounted on a steel support, fully assembled Lineabox drawer, bin-holder frame and bins
  • Lenght of the runners 500 mm
  • Adjustable steel support
  • Height of the Lineabox metal side 180 mm
LINEABOX
4-sided drawer - H 180 mm
Metal drawer with a rapid assembly system, with no machinery or templates needed
  • Height of the metal side 180 mm
  • Internal height 148 mm
  • Height of the frontal 197 mm
  • Bottom thickness 15-16 mm
  • Aluminium
SPLIT
Storage compartments H 70,5 mm
System of compartments for the organisation of drawer interiors
  • Height 70,5 mm
  • 5 different storage compartments
  • Finishes: woodgrain effect and brushed
  • Colours: titanium, pearl and black
  • Equipped with non-slip pads
I cookie ci aiutano a fornire i nostri servizi. Utilizzando tali servizi, accetti l'utilizzo dei cookie da parte nostra. Info